Fitting a gas hob or cooker: why it has to be a Gas Safe engineer
Updated 1 October 2026 · 2 minute read · Written by our Gas Safe engineers
New kitchens are where a lot of people first go looking for a local gas engineer near me. The worktops are in, the hob is in its box, and someone has to connect it. That someone has to be Gas Safe registered, even if all you are doing is moving the cooker a short way.
What counts as gas work in the kitchen
- Connecting a new gas hob to the supply
- Connecting a freestanding gas cooker, including the connection point and the stability chain or bracket
- Moving an existing cooker or hob, even slightly. The connection and the pipework have to be made and tested again.
- Disconnecting a gas appliance, for example when a gas hob is swapped for an induction one, so the supply can be capped off safely
What the visit involves
- Checking the supply. Undersized gas pipework is a common find in older homes. If a new hob goes on an old, small pipe, every appliance on the run can be starved. We check the size rather than assume.
- Making the connection with the right fittings for that appliance.
- Testing. The installation is tested to make sure it holds pressure, then the appliance is lit and checked burner by burner.
- Paperwork. You get a record of the gas work.
What to have ready
- The hob or cooker on site, with its installation instructions
- The worktop cut-out done, if it is a built-in hob
- Clear access to the gas meter, so the supply can be isolated
If the kitchen fitter is still working, tell us where they are up to. It is easier to connect a hob before the splashback goes on than after.
Gas in a let property
If you let the property, the new hob or cooker goes on the next annual gas safety record along with the boiler and any gas fire. Each appliance is listed separately.
Price
We price the job before we start, and you know what the visit costs before we set off. Send us your postcode, the make and model, and a photo of where it is going.
We are Gas Safe registered engineers based in Pencoed, covering Bridgend county first, then the Vale, Neath and Port Talbot.
Keep reading
- How to check a local gas engineer is really Gas Safe registered Thirty seconds on the Gas Safe Register before anyone touches your boiler or hob. What to check on the ID card, what it should list, and the paperwork you should be left with.
- Smell gas? What to do first, and when to ring a gas engineer A gas smell is an emergency call, not a booking. The free number, what to do and not do, and what a local gas engineer does once the property has been made safe.
- Capping off a gas fire, cooker or supply Taking out an old gas fire, going electric in the kitchen or stripping out a back boiler all leave a live gas pipe behind. How a gas engineer caps it off and proves it safe.